“ATM Data as a Service” project between Slovenia Control and EUROCONTROL successfully completes Phase 2 shadow operations
Ljubljana, Slovenia – Air traffic controllers at Slovenia Control’s Ljubljana Area Control Centre have successfully handled shadow operations in Slovenian airspace using data processed remotely at EUROCONTROL’s Maastricht Upper Area Control Centre (MUAC) as part of the “ATM Data as a Service” (ADaaS) project.
“ATM Data as a Service” (ADaaS), a three-year project between Slovenia Control and EUROCONTROL’s MUAC, aims to develop and deploy a prototype to demonstrate that ATM data can be provided from an operational ATM environment as a service to one or more civil air traffic service units (ATSUs) by a single distributed ATM system. The project, which contributes to the Single European Sky by deploying new technologies and best practices, is co-financed by the European Union’s Connecting Europe Facility (CEF) to the tune of EUR 2.45 million.
In June 2016, Phase 1 of the joint project was successfully completed. The expert teams from both air navigation service providers were able, within a limited time period, to overcome the operational and technical challenges inherent in such an innovative approach in the ATM environment. The next step, successfully completed in March 2017, was to demonstrate the use of an open interface between the MUAC flight data processing system and Slovenia Control’s controller working positions/human-machine interface. Data processed remotely at MUAC was displayed and used on three different types of controller working positions in the Slovenia Control simulator during the second phase of shadow operations. The human machine interface’s software and tools were adapted to communicate with the newly developed gateway, acting as a mediator and allowing an open interface by applying system-wide information management (SWIM) principles.
The final phase of the demonstration (Phase 3 of the ADaaS Demonstrator), planned for the third quarter of 2017, will involve a distributed flight data processing system in two locations (MUAC and Slovenia Control) and can serve controller working positions/human-machine interfaces either remotely or locally. Phase 3 will provide essential data on how to deploy a state-of-the-art data centre from which an ATM data service provider (ADSP) can deliver services to ATSUs with proper contingency and disaster recovery.
For further information, please contact:
Katja Tratnik, Zgornji Brnik 130n, 4210 Brnik - Aerodrom, Slovenia,
T: +386 4 20 40 235, M: +386 51 272 973,
Mireille Roman, EUROCONTROL Maastricht,
T: +31 43 366 1352